Manuals | Pulsar

Show device diagram

Available in digital and Fusion modes

The device is equipped with a IR Illuminator which provides significant increase in observation range in lowlight conditions and in the darkness.

To activate the IR illuminator, press and hold the UP (2) button. IR power level upon start is minimal .
IR Illuminator icon with respective power level is shown in the bar status.
To switch between power levels press and hold the IR button ( > > ) successively.
To turn the IR illuminator off, switch the power level with successive long presses of the UP (2) button until the icon in the status bar changes to .

Manual

Trionyx